The term fan coil units refers to the terminals, also known as fan coils, used for home or office air conditioning, with the function of both heating and cooling. Thus, fan coils are a viable alternative to traditional radiators, radiators and electric radiant panels to ensure the right thermal comfort in all rooms of one's home or office. The latest models are all of the latest generation, low energy consumption and perfectly combinable with an external heat pump or, if the installation of the latter is not possible, also monoblock, easy to install and with a really low noise level.

Inside the innovatively designedcasing that constitutes the exterior of the fan coil unit are one or more coils that allow heat exchange between water from the heating system and the air emitted by the terminal, an air filter, a fan, and a tray to collect the condensation that forms on the coils during the heat exchange process:

• The fan draws in the air in the room and pushes it first to the filter to purify it and then to the coils for heat exchange;
• The air absorbs or gives up heat to the water in the heating system pipes, depending on whether the room is to be heated or cooled;
• Once heated or cooled, the air is distributed throughout the room
  
  
  

Advantages:

• Fan cleaning: With Omnia fan coils you can perform, easily, fan blade cleaning. Now, in fact, you can open the fan's auger (the casing that encloses its blades) and proceed, then to their periodic cleaning
• Cleaning the condensate tray: Thanks to a new system of fixing the condensate tray, now, with Omnia fan coils, it can be easily cleaned. This important solution prevents, in the long run, the formation of bacteria, germs and mold in the tray itself, due to the condensation of moisture in the air
• Electrostatically preloaded filter: Omnia fan coils are equipped, as standard, with electrostatically precharged air filters. These filters, thanks to their special construction, absorb and retain suspended dust: the ideal system to ensure healthy air for the whole family
• Silent operation: Thanks to the adoption of special centrifugal fans, Omnia fan coils possess extremely silent ventilation that brings, these new fan coils, to the top of acoustic comfort thanks to the absence of noise peaks
• 3-speed centrifugal fan unit
• Maximum silence
• High design aesthetics with rounded lines
• Adjustable air distribution grille
• Automatic shutdown of the fan coil unit with the closing of the air distribution grille
• Small overall dimensions
• Electronic temperature control, automatic speed change on the fan, automatic season changeover and automatic on - off (thermostat version)
• Reversibility of hydraulic connections during installation
• Low pressure drop in heat exchange coils
• Electric motors with permanently inserted capacitors
• Ease of installation and maintenance
• Easy air filter extraction and cleaning
  
  

Features:

Heating function 2-pipe system configuration:

• Ambient air temperature 20°C bs
• Inlet water temperature 70°C; DT water 10°C
• Heat output (70°C) (H/M/L) 5940/4870/3530W
• Water flow rate (H/M/L) 521/427/310 l/h
• Pressure drop (H/M/L) 7.7/5.4/3 kPa
  
  

Heating:

• Ambient air temperature 20°C bs
• Inlet water temperature 50°C
• Water flow rate as in Cooling
• Heat output (50°C) (H/M/L) 3540/2860/2080WWater flow rate (H/M/L) 487/394/286 l/h
• Pressure drop (H/M/L) 16/11/6 kPa
  
  

Cold operation:

• Total cooling capacity (H/M/L) 2830/2290/1660W
• Sensible cooling capacity (H/M/L) 2040/1620/1160W
• Water flow rate (H/M/L) 487/394/286 l/h
• Water pressure drop (H/M/L) 18.9/12/7 kPA
  
  

General characteristics:

• Air flow rate (H/M/L) 460/350/240 cubic meters/h
• 2 Centrifugal type fans
• Power consumption (H/M/L) 42/35/30W
• Max. absorbed current 0.22A
• Sound power based on measurements made in accordance with Eurovent 8/2 (H/M/L) 50/43/34 db(A)
• Sound pressure measured in room with volume V=85m3 , reverberation time t=0.5s directionality factor Q=2; distance r=2.5m (H/M/L) 39.5/32.5/25.5 db(A)
• Water content 1.1 l
• Battery connections 1/2" diameter
• Connected speeds (H/M/L) V3/V2/V1
• Power supply 230V/1/50Hz
• Dimensions: Height 513 mm -Width 1200 mm
• Depth 173 mm
• Plinth height 93 mm
• Weight 19.5 kg