Japanese barberry 'Harlequin' is a deciduous shrub, enjoyed because it is so decorative. This barberry variant is named for the strong contrast between the pink-tinted leaves and the yellow flowers, which later give way to red berries; like a harlequin’s uniform, it is visually arresting. They tolerate sun, frost and all soil types.
Hardiness Zones
4 to 8
Care Guide for Japanese barberry 'Harlequin'
Feedback
Watering Care
Average water needs, watering when the top 3 cm of soil has dried out.
Plan your green oasis based on your criteria: plant type, pet safety, skill level, sites, and more.
Common Pests & Diseases About Japanese barberry 'Harlequin'
Feedback
Common issues for Japanese barberry 'Harlequin' based on 10 million real cases
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Plant dried up
The entire plant may dry out due to dieback or normal seasonal dormancy.
Solutions: The solution for a dried out plant depends on the cause, so determine the cause before selecting a treatment method. Adjust your watering: Stick your finger in the soil near the roots. If it feels bone dry or overly saturated, you need to adjust your watering frequency accordingly. Prune back dead foliage: Snip off any brown stems and leaves on the plant to make space for new growth. This encourages the roots to send up fresh stems. Move to a proper environment. This may involve decreasing or increasing sun exposure, depending on the species. Decrease fertilizer applications. If you have applied too much fertilizer, you can repot plants with fresh potting soil. Wait. If your plant has dried out as daylight is decreasing, it is entering dormancy. Decrease watering and wait until the plant resumes growth.
Anthracnose
Anthracnose causes grey-brown spots with black margins on leaves and stems.
Solutions: For less serious cases when only a few leaves are affected, complete the following: Prune affected leaves. Using pruning shears, remove leaves that have spots. Dispose of these leaves to avoid spreading the disease to other plants. Clear debris. To stop the spread of disease, remove debris and weeds from around plants. For serious cases when many leaves are infected with large splotches: Apply a fungicide. Fungicides won't cure current infections, but they will prevent anthracnose from spreading to uninfected tissue. Apply a fungicide before a dry period following product instructions. Products containing copper diammonia diacetate are most likely to be effective.
Underwatering yellow
A lack of water will cause the leaves to gradually turn yellow starting at the base of the branch while the entire plant appears to wilt.
Solutions: Your plant is very thirsty and needs water promptly. You can revive your plant by giving it water. The easiest technique is to slowly pour water into your plant’s soil so that the whole surface is moistened. If you pour the water too quickly, the water will flow directly through rather than diffusing throughout the soil. If your plant’s pot does not have drainage holes, do not give your plant more than about a third of the pot’s volume of water. If your plant’s pot does have drainage holes, you can add water slowly until the soil is thoroughly moistened and the water flows freely through the pot. If you trim off yellow leaves to improve the plant’s appearance, do not remove more than a third of the plant’s leaves. It may be better to wait until leaves have died and fallen off to remove them.
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Overview
Discolored spots on the foliage of plants are one of the most common disease problems people observe. These spots are caused by fungal and bacterial diseases, with most infections related to a fungal pathogen.
Brown spot can occurs on all houseplants, flowering ornamentals, vegetable plants, and leaves of trees, bushes, and shrubs. No plants are resistant to it, and the problem is worse in warm, wet environments. It can occur at any point in the life stage as long as leaves are present.
Small brownish spots appear on the foliage and enlarge as the disease progresses. In severe cases, the plant or tree is weakened when the lesions interrupt photosynthesis or cause defoliation.
Symptom Analysis
In most cases, brown spot only affects a small percentage of the whole plant, appearing on a small amount of the leaves. A small infection only puts minor stress on the plant. However, if left untreated and the disease progresses over numerous seasons, it will severely impact the health and productivity of the infected specimen.
Sporulation begins (reproduction of the fungal spores), and tiny spots appear on leaves.
Placement is often random and scattered as diseases are spread through raindrops.
May appear on lower leaves and the interior of the plant where humidity is higher.
Brown spots enlarge and grow large enough to touch neighboring spots to form a more prominent blotch.
Leaf margins may turn yellow.
Tiny black dots (fruiting bodies of the fungi) appear in the dead spots.
Blotches grow in size until the entire leaf is brown.
The leaf falls off the plant.
Severe Symptoms
Partial or complete premature defoliation
Reduced growth
Increased susceptibility to pests and other diseases
Disease Cause
Brown spot, or leaf spot, is a common descriptive term given to several diseases affecting the leaves of plants and trees. Around 85% of diseases exhibiting leaf spots are due to fungus or fungus-like organisms. Sometimes brown spot is caused by a bacterial infection, or insect activity with similar symptoms.
When conditions are warm and the leaf surfaces are wet, fungal spores being transported by wind or rain land on the surface and cling to it. They do not rupture the cell walls but grow in the space between the plant plasma membrane and the plant cell wall. As the spores reproduce, they release toxins and enzymes that cause necrotic spots (i.e., dead tissue) on the leaves, allowing the fungi to consume the products released when the cells degrade.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Plant dried up
The entire plant may dry out due to dieback or normal seasonal dormancy.
Symptom Analysis
Your plant has dried out and turned brown. It might be starting to wilt, with no noticeable green around the stems and leaves. Touch the leaves, and they may crinkle under your fingers.
Possible causes of a dried out plant include:
Not enough water. A lack of water will lead to dry plant tissue.
Too much water. Watering too much can lead to root rot which makes the plant struggle to take up water. Rotted, mushy roots are a sign of overeating.
Entering dormancy. As perennial plants enter their resting period known as dormancy, their leaves dry out and may fall off. This happens during decreasing day length.
Exposure to herbicides and other toxic substances. If a plant is hit with a large dose herbicide or other toxic chemical, the plant will turn brown.
Too much fertility. An excess of fertilizer can prevent plants from taking up water, leading to drying.
Improper sun exposure. Just like humans, plants can get sunburn by intense, direct light. Plants can also dry out if they don’t receive enough light.
To determine whether the plant is still alive and can be saved, you can:
Bend a stem. If the stem is pliable, the plant is still alive. If the stem breaks, the plant is dead.
Gently scratch the stem with your fingernail for signs of green inside. If your plant is dead, the stem will be brittle and brown throughout.
Cut the stems back a little bit a time for visible green growth. If none of the stems have visible green growth, the plant is dead.
Solutions
The solution for a dried out plant depends on the cause, so determine the cause before selecting a treatment method.
Adjust your watering: Stick your finger in the soil near the roots. If it feels bone dry or overly saturated, you need to adjust your watering frequency accordingly.
Prune back dead foliage: Snip off any brown stems and leaves on the plant to make space for new growth. This encourages the roots to send up fresh stems.
Move to a proper environment. This may involve decreasing or increasing sun exposure, depending on the species.
Decrease fertilizer applications. If you have applied too much fertilizer, you can repot plants with fresh potting soil.
Wait. If your plant has dried out as daylight is decreasing, it is entering dormancy. Decrease watering and wait until the plant resumes growth.
Prevention
Prevention involves providing your plant with the proper environment.
Provide the proper amount of water. The amount of water depends on a plant’s size, species, and environment. A general rule is to allow soil to dry out between waterings.
Place plants in the proper environment. Provide the proper hours of sun and temperature for your individual plant.
Provide proper fertility. Most plants only need to be fertilized once or twice a year; don’t overapply.
Keep plants free from toxic substances. Keep herbicides and toxic household chemicals away from your plants.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Anthracnose
Anthracnose causes grey-brown spots with black margins on leaves and stems.
Overview
Anthracnose is a group of fungal diseases that affects foliage, twigs, and stems. It can affect a wide variety of plants including trees, shrubs, vegetables, grasses, and flowers and is most likely to occur in cool, wet conditions. It often occurs in the spring when rain splashes on overwintering fungi.
Some varieties of plants are bred to be resistant to anthracnose. If plants are not resistant, they can become infected year after year. Plants can also recover from infection only to be reinfected later that year.
In most cases, anthracnose only causes minor damage. However, young plants are susceptible to major damage. In the worst-case scenarios, this disease can cause major defoliation.
Symptom Analysis
Plant leaves will show gray or brown blotches that may be surrounded by black edges. Blotches may be only one small spot or many spots that cover an entire leaf. If these symptoms progress, leaves may drop prematurely.
Anthracnose can also cause small lesions on twigs and stems. These often appear as brown, gray, or orange blisters. If left untreated, twigs may drop.
Disease Cause
Anthracnose is caused by one of several possible fungi. These pathogens overwinter on plant debris. When water hits these fungi in the spring, spores release and land on plant tissue. When the spores germinate on leaf or twig tissue, they cause anthracnose symptoms.
These fungi need moist conditions to live. Therefore, they will not be a problem in dry conditions.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Underwatering yellow
A lack of water will cause the leaves to gradually turn yellow starting at the base of the branch while the entire plant appears to wilt.
Symptom Analysis
Your plant’s leaves are turning yellow due to underwatering, the oldest leaves turn yellow first. Leaves yellow from the edges towards the middle. Other signs of underwatering include the soil feeling very dry or pulling away from the edge of its pot.
Solutions
Your plant is very thirsty and needs water promptly.
You can revive your plant by giving it water. The easiest technique is to slowly pour water into your plant’s soil so that the whole surface is moistened. If you pour the water too quickly, the water will flow directly through rather than diffusing throughout the soil. If your plant’s pot does not have drainage holes, do not give your plant more than about a third of the pot’s volume of water. If your plant’s pot does have drainage holes, you can add water slowly until the soil is thoroughly moistened and the water flows freely through the pot.
If you trim off yellow leaves to improve the plant’s appearance, do not remove more than a third of the plant’s leaves. It may be better to wait until leaves have died and fallen off to remove them.
Prevention
When you get a new plant, research its specific watering needs. Set reminders so that you remember to water your plants consistently. Not all plants are the same, so make sure to differentiate all of your plants in your watering schedule.
You may wish to purchase a commercial soil water meter which has a long probe that you place near your plant’s roots. Be sure to check it frequently and water your plant when the soil water meter indicates that it needs watering.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Scan the QR code with your phone camera to download the app
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Continue reading in our app - it's better
A database of 400000+ plants and unlimited guides at your fingertips...
Your Ultimate Guide to Plants
Identify grow and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Botanist in your pocket
Scan the QR code with your phone camera to download the app
About
Care Guide
More Info
Pests & Diseases
Japanese barberry 'Harlequin'
Berberis thunbergii f. atropurpurea 'Harlequin'
Also known as: Red barberry 'Harlequin'
Japanese barberry 'Harlequin' is a deciduous shrub, enjoyed because it is so decorative. This barberry variant is named for the strong contrast between the pink-tinted leaves and the yellow flowers, which later give way to red berries; like a harlequin’s uniform, it is visually arresting. They tolerate sun, frost and all soil types.
Hardiness Zones
4 to 8
Instantly identify plants with a snap
Snap a photo for instant plant ID, gaining quick insights on disease prevention, treatment, toxicity, care, uses, and symbolism, etc.
Plant care made easier than ever with our tailor-made smart care reminder.
Download the App for Free
Common Pests & Diseases About Japanese barberry 'Harlequin'
Feedback
Common issues for Japanese barberry 'Harlequin' based on 10 million real cases
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Solutions: In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary. Organic options won’t kill the fungus, but will prevent it from spreading. Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear. Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread. Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Learn More About the Brown spot
Plant dried up
The entire plant may dry out due to dieback or normal seasonal dormancy.
Solutions: The solution for a dried out plant depends on the cause, so determine the cause before selecting a treatment method. Adjust your watering: Stick your finger in the soil near the roots. If it feels bone dry or overly saturated, you need to adjust your watering frequency accordingly. Prune back dead foliage: Snip off any brown stems and leaves on the plant to make space for new growth. This encourages the roots to send up fresh stems. Move to a proper environment. This may involve decreasing or increasing sun exposure, depending on the species. Decrease fertilizer applications. If you have applied too much fertilizer, you can repot plants with fresh potting soil. Wait. If your plant has dried out as daylight is decreasing, it is entering dormancy. Decrease watering and wait until the plant resumes growth.
Learn More About the Plant dried up
Anthracnose
Anthracnose causes grey-brown spots with black margins on leaves and stems.
Solutions: For less serious cases when only a few leaves are affected, complete the following: Prune affected leaves. Using pruning shears, remove leaves that have spots. Dispose of these leaves to avoid spreading the disease to other plants. Clear debris. To stop the spread of disease, remove debris and weeds from around plants. For serious cases when many leaves are infected with large splotches: Apply a fungicide. Fungicides won't cure current infections, but they will prevent anthracnose from spreading to uninfected tissue. Apply a fungicide before a dry period following product instructions. Products containing copper diammonia diacetate are most likely to be effective.
Learn More About the Anthracnose
Underwatering yellow
A lack of water will cause the leaves to gradually turn yellow starting at the base of the branch while the entire plant appears to wilt.
Solutions: Your plant is very thirsty and needs water promptly. You can revive your plant by giving it water. The easiest technique is to slowly pour water into your plant’s soil so that the whole surface is moistened. If you pour the water too quickly, the water will flow directly through rather than diffusing throughout the soil. If your plant’s pot does not have drainage holes, do not give your plant more than about a third of the pot’s volume of water. If your plant’s pot does have drainage holes, you can add water slowly until the soil is thoroughly moistened and the water flows freely through the pot. If you trim off yellow leaves to improve the plant’s appearance, do not remove more than a third of the plant’s leaves. It may be better to wait until leaves have died and fallen off to remove them.
Learn More About the Underwatering yellow
Brown spot
This infection can cause brown spots or patches to appear on the plant.
Overview
Discolored spots on the foliage of plants are one of the most common disease problems people observe. These spots are caused by fungal and bacterial diseases, with most infections related to a fungal pathogen.
Brown spot can occurs on all houseplants, flowering ornamentals, vegetable plants, and leaves of trees, bushes, and shrubs. No plants are resistant to it, and the problem is worse in warm, wet environments. It can occur at any point in the life stage as long as leaves are present.
Small brownish spots appear on the foliage and enlarge as the disease progresses. In severe cases, the plant or tree is weakened when the lesions interrupt photosynthesis or cause defoliation.
Symptom Analysis
In most cases, brown spot only affects a small percentage of the whole plant, appearing on a small amount of the leaves. A small infection only puts minor stress on the plant. However, if left untreated and the disease progresses over numerous seasons, it will severely impact the health and productivity of the infected specimen.
Sporulation begins (reproduction of the fungal spores), and tiny spots appear on leaves.
Placement is often random and scattered as diseases are spread through raindrops.
May appear on lower leaves and the interior of the plant where humidity is higher.
Brown spots enlarge and grow large enough to touch neighboring spots to form a more prominent blotch.
Leaf margins may turn yellow.
Tiny black dots (fruiting bodies of the fungi) appear in the dead spots.
Blotches grow in size until the entire leaf is brown.
The leaf falls off the plant.
Severe Symptoms
Partial or complete premature defoliation
Reduced growth
Increased susceptibility to pests and other diseases
Disease Cause
Brown spot, or leaf spot, is a common descriptive term given to several diseases affecting the leaves of plants and trees. Around 85% of diseases exhibiting leaf spots are due to fungus or fungus-like organisms. Sometimes brown spot is caused by a bacterial infection, or insect activity with similar symptoms.
When conditions are warm and the leaf surfaces are wet, fungal spores being transported by wind or rain land on the surface and cling to it. They do not rupture the cell walls but grow in the space between the plant plasma membrane and the plant cell wall. As the spores reproduce, they release toxins and enzymes that cause necrotic spots (i.e., dead tissue) on the leaves, allowing the fungi to consume the products released when the cells degrade.
Solutions
In minor cases of brown spot, there isn’t any need to treat the disease. However, if much of the foliage is affected and defoliation occurs, the plant will benefit from getting rid of the infection. It is recommended to start by applying organic treatment options, working up to the more potent synthetic, chemical fungicides if necessary.
Organic options won’t kill the fungus, but will prevent it from spreading.
Dissolve ½ teaspoon of baking soda and one teaspoon of liquid soap in a gallon of water. Using a spray bottle, spray on tops and bottoms of leaves until the mixture drips off. Repeat every two weeks until existing spots stop enlarging and new spots no longer appear.
Spray a copper-based fungicidal soap on the leaves, coating the top and bottom leaf surfaces. Reapply as directed on the product label. Copper penetrates the leaf surface and prevents germination of spores so the fungus cannot spread.
Apply an all-purpose fungicide to the entire plant, following the label instructions carefully.
Prevention
Like many other diseases, it is easier to prevent brown spot than cure it, and this is done through cultural practices.
Clear fall leaves from the ground before winter to minimize places where fungi and bacteria can overwinter.
Maintain good air movement between plants through proper plant spacing.
Increase air circulation through the center of plants through pruning.
Thoroughly clean all pruning tools after working with diseased plants.
Never dispose of disease plant material in a compost pile.
Avoid overhead watering to keep moisture off of the foliage.
Keep plants healthy by providing adequate sunlight, water, and fertilizer.
Continue reading in our app - it's better
A database of 400000+ plants unlimited guides at your fingertips...
Plant dried up
The entire plant may dry out due to dieback or normal seasonal dormancy.
Symptom Analysis
Your plant has dried out and turned brown. It might be starting to wilt, with no noticeable green around the stems and leaves. Touch the leaves, and they may crinkle under your fingers.
Possible causes of a dried out plant include:
Not enough water. A lack of water will lead to dry plant tissue.
Too much water. Watering too much can lead to root rot which makes the plant struggle to take up water. Rotted, mushy roots are a sign of overeating.
Entering dormancy. As perennial plants enter their resting period known as dormancy, their leaves dry out and may fall off. This happens during decreasing day length.
Exposure to herbicides and other toxic substances. If a plant is hit with a large dose herbicide or other toxic chemical, the plant will turn brown.
Too much fertility. An excess of fertilizer can prevent plants from taking up water, leading to drying.
Improper sun exposure. Just like humans, plants can get sunburn by intense, direct light. Plants can also dry out if they don’t receive enough light.
To determine whether the plant is still alive and can be saved, you can:
Bend a stem. If the stem is pliable, the plant is still alive. If the stem breaks, the plant is dead.
Gently scratch the stem with your fingernail for signs of green inside. If your plant is dead, the stem will be brittle and brown throughout.
Cut the stems back a little bit a time for visible green growth. If none of the stems have visible green growth, the plant is dead.
Solutions
The solution for a dried out plant depends on the cause, so determine the cause before selecting a treatment method.
Adjust your watering: Stick your finger in the soil near the roots. If it feels bone dry or overly saturated, you need to adjust your watering frequency accordingly.
Prune back dead foliage: Snip off any brown stems and leaves on the plant to make space for new growth. This encourages the roots to send up fresh stems.
Move to a proper environment. This may involve decreasing or increasing sun exposure, depending on the species.
Decrease fertilizer applications. If you have applied too much fertilizer, you can repot plants with fresh potting soil.
Wait. If your plant has dried out as daylight is decreasing, it is entering dormancy. Decrease watering and wait until the plant resumes growth.
Prevention
Prevention involves providing your plant with the proper environment.
Provide the proper amount of water. The amount of water depends on a plant’s size, species, and environment. A general rule is to allow soil to dry out between waterings.
Place plants in the proper environment. Provide the proper hours of sun and temperature for your individual plant.
Provide proper fertility. Most plants only need to be fertilized once or twice a year; don’t overapply.
Keep plants free from toxic substances. Keep herbicides and toxic household chemicals away from your plants.
Continue reading in our app - it's better
A database of 400000+ plants unlimited guides at your fingertips...
Anthracnose
Anthracnose causes grey-brown spots with black margins on leaves and stems.
Overview
Anthracnose is a group of fungal diseases that affects foliage, twigs, and stems. It can affect a wide variety of plants including trees, shrubs, vegetables, grasses, and flowers and is most likely to occur in cool, wet conditions. It often occurs in the spring when rain splashes on overwintering fungi.
Some varieties of plants are bred to be resistant to anthracnose. If plants are not resistant, they can become infected year after year. Plants can also recover from infection only to be reinfected later that year.
In most cases, anthracnose only causes minor damage. However, young plants are susceptible to major damage. In the worst-case scenarios, this disease can cause major defoliation.
Symptom Analysis
Plant leaves will show gray or brown blotches that may be surrounded by black edges. Blotches may be only one small spot or many spots that cover an entire leaf. If these symptoms progress, leaves may drop prematurely.
Anthracnose can also cause small lesions on twigs and stems. These often appear as brown, gray, or orange blisters. If left untreated, twigs may drop.
Disease Cause
Anthracnose is caused by one of several possible fungi. These pathogens overwinter on plant debris. When water hits these fungi in the spring, spores release and land on plant tissue. When the spores germinate on leaf or twig tissue, they cause anthracnose symptoms.
These fungi need moist conditions to live. Therefore, they will not be a problem in dry conditions.
Solutions
For less serious cases when only a few leaves are affected, complete the following:
Prune affected leaves. Using pruning shears, remove leaves that have spots. Dispose of these leaves to avoid spreading the disease to other plants.
Clear debris. To stop the spread of disease, remove debris and weeds from around plants.
For serious cases when many leaves are infected with large splotches:
Apply a fungicide. Fungicides won't cure current infections, but they will prevent anthracnose from spreading to uninfected tissue. Apply a fungicide before a dry period following product instructions. Products containing copper diammonia diacetate are most likely to be effective.
Prevention
Since anthracnose is difficult to treat once it appears, it's important to prevent it from infecting your plants.
Remove debris. Clear all old plant material and weeds from under and around plants in the fall. This material can harbor anthracnose spores that will later infect plants.
Select resistant varieties. When adding new plants, choose varieties that are resistant to anthracnose.
Increase airflow. Anthracnose thrives in wet conditions, so space plants far enough apart to allow for good airflow.
Avoid overhead irrigation. To keep plant tissue dry, avoid using overhead irrigation. Instead, water at the base of plants or install drip irrigation.
Use a preventative fungicide. If there is a reason to suspect future anthracnose outbreaks, apply a fungicide in the early spring.
Continue reading in our app - it's better
A database of 400000+ plants unlimited guides at your fingertips...
Underwatering yellow
A lack of water will cause the leaves to gradually turn yellow starting at the base of the branch while the entire plant appears to wilt.
Symptom Analysis
Your plant’s leaves are turning yellow due to underwatering, the oldest leaves turn yellow first. Leaves yellow from the edges towards the middle. Other signs of underwatering include the soil feeling very dry or pulling away from the edge of its pot.
Solutions
Your plant is very thirsty and needs water promptly.
You can revive your plant by giving it water. The easiest technique is to slowly pour water into your plant’s soil so that the whole surface is moistened. If you pour the water too quickly, the water will flow directly through rather than diffusing throughout the soil. If your plant’s pot does not have drainage holes, do not give your plant more than about a third of the pot’s volume of water. If your plant’s pot does have drainage holes, you can add water slowly until the soil is thoroughly moistened and the water flows freely through the pot.
If you trim off yellow leaves to improve the plant’s appearance, do not remove more than a third of the plant’s leaves. It may be better to wait until leaves have died and fallen off to remove them.
Prevention
When you get a new plant, research its specific watering needs. Set reminders so that you remember to water your plants consistently. Not all plants are the same, so make sure to differentiate all of your plants in your watering schedule.
You may wish to purchase a commercial soil water meter which has a long probe that you place near your plant’s roots. Be sure to check it frequently and water your plant when the soil water meter indicates that it needs watering.
Continue reading in our app - it's better
A database of 400000+ plants unlimited guides at your fingertips...
Treat and prevent plant diseases.
AI-powered plant doctor helps you diagnose plant problems in seconds.
Download the App for Free
Your Ultimate Guide to Plants
Identify grow and nurture the better way!
17,000 local species +400,000 global species studied
Nearly 5 years of research
80+ scholars in botany and gardening
Continue reading in our app - it's better
A database of 400000+ plants unlimited guides at your fingertips...
Cookie Management Tool
In addition to managing cookies through your browser or device, you can change your cookie settings below.
Necessary Cookies
Necessary cookies enable core functionality. The website cannot function properly without these cookies, and can only be disabled by changing your browser preferences.
Analytical Cookies
Analytical cookies help us to improve our application/website by collecting and reporting information on its usage.
Cookie Name
Source
Purpose
Lifespan
_ga
Google Analytics
These cookies are set because of our use of Google Analytics. They are used to collect information about your use of our application/website. The cookies collect specific information, such as your IP address, data related to your device and other information about your use of the application/website. Please note that the data processing is essentially carried out by Google LLC and Google may use your data collected by the cookies for own purposes, e.g. profiling and will combine it with other data such as your Google Account. For more information about how Google processes your data and Google’s approach to privacy as well as implemented safeguards for your data, please see here.
1 Year
_pta
PictureThis Analytics
We use these cookies to collect information about how you use our site, monitor site performance, and improve our site performance, our services, and your experience.
1 Year
Cookie Name
_ga
Source
Google Analytics
Purpose
These cookies are set because of our use of Google Analytics. They are used to collect information about your use of our application/website. The cookies collect specific information, such as your IP address, data related to your device and other information about your use of the application/website. Please note that the data processing is essentially carried out by Google LLC and Google may use your data collected by the cookies for own purposes, e.g. profiling and will combine it with other data such as your Google Account. For more information about how Google processes your data and Google’s approach to privacy as well as implemented safeguards for your data, please see here.
Lifespan
1 Year
Cookie Name
_pta
Source
PictureThis Analytics
Purpose
We use these cookies to collect information about how you use our site, monitor site performance, and improve our site performance, our services, and your experience.
Lifespan
1 Year
Marketing Cookies
Marketing cookies are used by advertising companies to serve ads that are relevant to your interests.
Cookie Name
Source
Purpose
Lifespan
_fbp
Facebook Pixel
A conversion pixel tracking that we use for retargeting campaigns. Learn more here.
1 Year
_adj
Adjust
This cookie provides mobile analytics and attribution services that enable us to measure and analyze the effectiveness of marketing campaigns, certain events and actions within the Application. Learn more here.
1 Year
Cookie Name
_fbp
Source
Facebook Pixel
Purpose
A conversion pixel tracking that we use for retargeting campaigns. Learn more here.
Lifespan
1 Year
Cookie Name
_adj
Source
Adjust
Purpose
This cookie provides mobile analytics and attribution services that enable us to measure and analyze the effectiveness of marketing campaigns, certain events and actions within the Application. Learn more here.