WHAT IS IT?
The RMT500 in-line RF dimmer for GU10 LED lamps, tungsten, low-voltage halogen and other
Trailing Edge dimmable loads.
A compact 500W RF dimmer designed to fit through a standard down-light cut-out.
Trailing Edge dimming technology gives smooth quiet dimming of electronic transformer fed loads and maximises dimming performance of most GU10 LED down-lights.
The dimmer is connected in-line before the first lighting fitting to enable dimming of up to 500W of
Trailing Edge dimmable loads.
Controlled from any Rako Rakom RF device, for example the RCM/RCP push button RF wall plate.
In Control
- Designed to fit in a ceiling void or cupboard, the RMT500 Trailing Edge dimmer can control up to 500 watts of mains dimmable lighting loads. The unit can also be used for exterior lighting control applications, with the use of a weatherproof IP rated enclosure
- The RMT500 uses Trailing Edge dimming technology to maximise the performance of most GU10 dimmable LED down-lights (refer to Rako Controls for compatibility and maximum loadings). The RMT500 is also the recommended dimmer for GU10 tungsten lamps due to its in-built shortcircuit protection, necessary with this style of lamps.
- 16 Scene memory capacity, can be fully integrated into Rako wired systems. Easy set-up and manual On/Off control using the set-up button.
- Full rising clamp terminals and mounting bracket for easy installation.
- Programmed using either an RCM/RCP RF wall-plate or RASOFT PC Software suite, the RMT500 stores the House, Room and Channel address plus 16 preset scene levels in a non-volatile memory.
- The RMT500 dimmer can be controlled from any Rako transmitter such as RCM/RCP wallplates, RAH hand-helds and Bridge modules and forms the foundation of any Rako wireless scene-set system.
NOTE: – THE RMT500 IS NOT SUITABLE FOR USE WITH INDUCTIVE OR WIRE-WOUND LOADS, Please see RML250, RML500 or RML1200 leading edge Dimming modules for INDUCTIVE OR WIRE-WOUND LOADS
Technical Specification
Dimensions: 138x46x40mm
Input supply: 230V AC +/-10% 50Hz
Weight: 120g
Housing: UL V0 material
Climate range
- Temperature: +2C to +40C
- Humidity: +5% - 95% non condensing
Connections:
- 3 way screw terminals for mains SUPPLY power (LNE)
- 3 way screw terminals for mains LOAD power (LNE)
Protection:
- Auto resetting over current protection
- Auto thermal shutdown
- Voltage surge protection
Load Types:
Minimum Load: 1w
Maximum Load: 500VA Refer to Rako when dimming GU10 style LEDs
Terminal Sizes: 4mm2
Standards
Emissions: EN61000-6-3 : 2001
Immunity: EN61000-6-1 : 2001
Communication: Rakom coded fm radio, 433.9MHz
Memory: Flash memory (non volatile) Firmware upgrades via RASOFT programming
Software
Warranty: 2Year Return to Rako for Repair. Products older than 2 years can be repaired by Rako for a fixed fee of £50.
Simplify my Home are Authorised Rako Dealers
- Free Design Service - Call us to discuss your requirements or email us your lighting schedule/plans.
- Developer/Trade Pricing - Available upon request
- Support our clients - We offer on-site support and commissioning.
- Confidence in Quality - Our Rako Specialist has designed, installed and commissioned some of the largest Residential & Commercial Projects in the UK.
NOTE – THE RMT500 IS NOT SUITABLE FOR USE WITH INDUCTIVE OR WIRE-WOUND LOADS.
£125.00 excl. VAT
Available for online purchase for Home delivery via Courier or Direct from Manufacturer/Distributor.
/694bbca056044bd0a003d37274c15ea7.jpg)
/694bbca056044bd0a003d37274c15ea7.jpg)
/2f3cbd6511494ad59905daafd66993b2.jpg)
/007fe786d07a4da4bd0d247067e115b1.jpg)